Will the display fit the counter? A measurement sheet for retail teams

Use this sheet when a shop is adding a display to a counter that is already in use. One person measures the counter and products. A colleague who operates the till or restocks the shelf tests a paper mock-up. Keep their notes together for the fabricator.

1. Record the space you can actually use

Sketch the counter from above. Mark the customer edge, staff edge, till, cable exits and anything that has to stay accessible. Measure the clear rectangle left for the display. Also measure the height below the lowest shelf, light or sign. Use millimetres throughout, and label each number as width, depth or height.

Field Your measurement or observation
Store, counter and measurement date
Clear width × depth × height (mm)
Objects that must stay accessible
Customer approach and staff refill side
Widest product including packaging (mm)
Tallest product in its normal use position (mm)
Weight of one filled product and quantity on display

2. Try the footprint on paper

Cut paper to the proposed outside width and depth. Set it on the counter and put the actual products on top. Mark where a label must be readable, then ask a colleague to lift out the item furthest from them. Try again with the till drawer open and with a second person standing where a customer normally waits. Mark any collision on the paper and note which action caused it.

For a shelf or tray, record two dimensions separately: the outside footprint that has to fit the counter and the usable inside space the products need. Leave the wall thickness, joints and reinforcement for the fabricator to propose against the load and span.

3. Work through one example

Suppose the counter has 420 × 260 mm free and the first paper layout is 400 × 240 mm. Centred on the counter, it leaves just 10 mm on each edge. Three boxed products, each 80 mm wide, occupy 240 mm before finger room, dividers or side walls. The spare 160 mm on the paper looks generous, yet it tells you nothing about whether a staff member can reach over the display to refill it. Test that movement before fixing the number of rows. These figures are an example layout, not fabrication tolerances.

4. Hand over a brief that can be checked

Attach the marked sketch and one photo from each working side, with people and customer details out of frame. Add quantity, intended indoor or outdoor use, the required handover date and who will approve the sample. Ask the fabricator to show the proposed outside size and usable inside dimensions on the same drawing. Have the store team repeat the refill test on the sample before approving a batch.

Prepared for retail and fit-out teams by Acrylic Gallery Plus, Dubai, with AI-assisted drafting. The company’s acrylic display stand specifications and quotation checklist explain what to include when requesting a bespoke stand.