What to specify when sourcing a silicon carbide wafer

What to specify when sourcing a silicon carbide wafer

Start by stating whether the order is for a bare substrate or an epitaxial wafer. An epi layer adds separate thickness and doping requirements; the substrate still has its own specification.

  • Specify polytype, conductivity class and the electrical parameter that must be reported. Distinguish conductive and semi-insulating material in the RFQ.
  • Identify the orientation, allowed offcut and face to be polished or grown on. Write down any backside requirements for handling or metrology.
  • List diameter, thickness, acceptable warp and edge exclusion. If defects are critical, give both an acceptance limit and the reference inspection method.
  • Ask for lot traceability and representative inspection data before ordering a qualification batch. Keep agreed criteria on the purchase specification for repeat lots.

The JXTSEMI silicon carbide wafer catalog shows examples of substrate configurations. Confirm availability and inspection terms for the exact configuration.